SONIC LASER ANIMAL CHASER
Instructions
To Repel Dogs and Cats: Press the laser light butter on the side top and point directly at the dog or cat, then press the “Start” button for a few seconds. The ultrasonic sound should discourage the dag from approaching. Press “Start” button for a longer period if necessary. Please note that the prime operating range up to 80 metres.
The Sonic laser animal chaser will discourage most dogs and cats, but may not be effective in all situations as some older animal may be hearing impaired.Use good judgment when approaching animals, taking care not to surprise them.
Specifications
Power Supply: 1X9V Battery (Not Included)
Output: 9V DC
Working Current: Less than 100ma
Effective Range: up to 15 metres
Ultasonic Frequency: 25KHz
Battery Placement
Always use a 9 Volt Alkaline battery, Your unit will not be effective unless you use an Alkaline bettery.
1. Slide the battery compartment lid away from the unit,
2. Connect your 9 Volt Alkaline battery onto the proper terminal Heads, Silde the battery compartment lid back onto unit.
3. If the red light located on the top comes on and stays on when depressing the “start” button the unit is functioning properly, if the red light does not come on, change the battery.
Kind reminder
1. Do not touch the screened area on the front. Denting or demaging of this area may cause the unit to maifunction.
2. Do not use on other animals or any use this is not recommended.
3. Should not be used on humands or within one foot range of a pet.
4. Use caution when dealing with potentially dangerous animals.
5. Keep the Sonic laser Animal chaser away from children.
6. Do not point laser light directly into the eyes, it will cause serious damage to the eyes.